SW-G04 Northman
SW-G04 Northman
คุณลักษณะ
- Armature operates in system oil. Impact is decreased and cushioning added, making noise lowered & solenoid life Prolonged.
- Wet armature solenoid eliminates push pin seal, reducing seal wear or leakage for longer valve life.
- Molded coil gives maximum insulating properties. They are protected by a special resin and impervious to moisture and dirt for ease of maintenance.
- Plug-in solenoid, easy to change coil.
- Change of pilot and drain can be easily accomplished by plugging or unplugging.
- Spool is designed to avoid creating jet flow or turbulence under high pressure and flow.
การเลือกรุ่น SW-G04 Northman
สเปคSW-G04 Northman
สเปคโซลินอยด์ SW-G04 Northman
ข้อมูลเทคนิค SW-G04 Northman :
- Solenoid can be used within − 10% to + 10% of the rated voltage of the coil.
- Withstand voltage 1500 v/sec.
- Insulation resistance over 100MΩ.
- A momentary signal of approx 0.1 second is required for shifting action.
- Pilot pressure of internally drained valves must always exceed tank port pressure by a minimum of 8.0 kgf/cm2 (113 PSI) Valve must be
- externally drained if there is a possibility of tank line persuader surges overcoming this differential.
- Open center spools C3, C5, C6, C60 must be externally piloted.
อุปกรณ์ SW-G04 Northman :
- Mounting bolt kits are supplied with valve socket head cap screws
M6 x 45 L 2 pieces (1/4"− 20 UNC − 2B x 1 3/4"L) for tightening torque 120-150 kgf-cm.(104-130 lbs-in).
M10 x 50 L 4 pieces (3/8" − 16 UNC-2B x 2"L) for tightening torque 580-720 kgf-cm.(502-624 lbs-in). - O-ring P22A 90° 4 pieces, P9 90 ° 2 pieces.
ขนาด SW-G04 Northman :
การต่อใช้งาน SW-G04 Northman :
ดาวน์โหลด PDF SW-G04 Northman :
