SW-G06 Northman
SW-G06 Northman
คุณลักษณะ
- Armature operates in system oil. Impact is decreased and cushioning added, making noise lowered & solenoid life Prolonged.
- Wet armature solenoid eliminates push pin seal, reducing seal wear or leakage for longer valve life.
- Molded coil gives maximum insulating properties. They are protected by a special resin and impervious to moisture and dirt for ease of maintenance.
- Plug-in solenoid, easy to change coil.
- Change of pilot and drain can be easily accomplished by plugging or unplugging.
- Spool is designed to avoid creating jet flow or turbulence under high pressure and flow.
การเลือกรุ่น SW-G06 Northman
สเปค SW-G06 Northman
สเปคโซลินอยด์ SW-G06 Northman
ข้อมูลเทคนิค SW-G06 Northman:
- Solenoid can be use within − 10% to + 10% of the rated voltage of the coil.
- Withstand voltage 1500 v/sec.
- Insulation resistance over 100MΩ.
- A momentary signal of approx. 0.1 second is required for shifting action.
- Pilot pressure of internally drained valves must always exceed tank port pressure by a minimum of 3.5 kgf/cm2 (50 PSI) Valve must be externally drained if there is a possibility of tank line pressure surges overcoming this differential.
- Open center spools C3, C5, C6, C60 must be externally piloted.
อุปกรณ์เสริม SW-G06 Northman:
- Mounting bolt kits are supplied with valve socket head cap screws
M12x60L 6 pieces (1/2"-13UNC-2Bx2 3/8" L) for tightening torque 1000 - 1230 kgf-cm. (886 - 1066 lbs-in). - O-ring P28 90° 4 pieces, P21 90 ° 2 pieces.
ขนาด SW-G06 Northman
ดาวน์โหลดข้อมูล PDF SW-G06 Northman
