SW-G10 Northman
SW-G10 Northman
คุณลักษณะ
- Armature operates in system oil. Impact is decreased and cushioning
added, making noise lowered & solenoid life Prolonged. - Wet armature solenoid eliminates push pin seal, reducing seal wear or
leakage for longer valve life. - Molded coil gives maximum insulating properties. They are protected
by a special resin and impervious to moisture and dirt for ease of
maintenance. - Plug-in solenoid, easy to change coil.
- Change of pilot and drain can be easily accomplished by plugging or
unplugging. - Spool is designed to avoid creating jet flow or turbulence under high
pressure and flow.
การเลือกรุ่น SW-G10 Northman
สเปค SW-G10 Northman
สเปคโซลินอยด์ SW-G10 Northman
ข้อมูลเทคนิค SW-G10 Northman:
- Solenoid can be used within − 10% to + 10% of the rated voltage of the coil.
- Withstand voltage 1500 v/sec.
- Insulation resistance over 100MΩ.
- A momentary signal of approx. 0.1 second is required for shifting action.
- Pilot pressure of internally drained valves must always exceed tank port pressure by a minimum of 10 kgf/cm2 (140 PSI)
Valve must be externally drained if there is a possibility of tank line pressure surges overcoming this differential. - Open center spools C3, C5, C6, C60 must be externally piloted.
พอร์ทต่อใช้งาน SW-G10 Northman:
- With solenoid “b” energized P->A B->T.
- With solenoid “a” energized P->B A->T.
- (But port intrconnedtions are reversed for C3 C5,C6,C60 type)
อุปกรณ์เสริม SW-G10 Northman :
- Mounting bolt kits are supplied with valve socket head cap screws
- M20x75L 6 pieces (3/4"-10UNC-2Bx2 3" L) for tightening torque 4730 - 5850 kgf-cm. (4100 - 5060 lbs-in).
- O-ring P41 90° 4 pieces, P20 90 ° 2 pieces.
ขนาด SW-G10 Northman
การต่อสายใช้งาน SW-G10 Northman
ดาวน์โหลด PDF SW-G10 Northman
