SMC SJ2000/ SMC SJ3000
SMC SJ2000/ SMC SJ3000
4 Port Solenoid Valve/Cassette Type Manifold SMC SJ2000/3000
วาล์วควบคุมทิศทาง SMC ( SMC Directional Control Valve ) | จำหน่ายวาล์ว SMC
จำหน่ายวาล์วควบคุมทิศทาง SMC ผลิตภัณฑ์นิวเมติกจากประเทศญี่ปุ่น อันดับ 1 ในประเทศ คุณภาพสูง SMC วาล์ว
บริการให้คำปรึกษา เลือกใช้งาน วาล์ว SMC | เลือกรุ่นวาล์ว SMC |
รายละเอียดผลิตภัณฑฺ์รุ่น SMC SJ2000/ SMC SJ3000
Takes uo minimal space with a body width of 7.5mm (SJ2000)or 10mm (SJ3000).
■ การสิ้นเปลืองกำลังไฟฟ้า ( Power consumption )
■ อายุการใช้งาน มากกว่า 50 ล้านครั้ง ( Service life of 50 million cycles or more )
ข้อกำหนดภายใต้เงื่อนไขการทดสอบมาตราฐานผลิตภัณฑ์ของ SMC (Based on SMC life test conditions)
Plug-in cable type Non plug-in individual wiring compliant, too
SUP/EXH block assembly with regulator and pressure switch
This pressure regulator is intended to adjust the SUP pressure of the manifold.
Additionally, pressure switch and pressure gauge can be mounted.
Regulator block
This is a regulator block with the same width (10 mm) as the SJ3000.
Pressure supplied from the D side is used to reduce pressure in the manifold.
The U side valves are all depressurized from the regulator block.
Valve with speed controller
As a speed controller is built-into this valve, the cylinder speed can be adjusted on the valve side.
Two types, meter-in and meter-out, are set.
Intermediate connector block assembly
This connector block can be used by inserting it into the middle of the manifold.
This can be used, for example, when you wish to separate electrical control of valves in the same manifold, or when the number of control points is insufficient.
The assembly is also compatible with PC wiring with the power supply terminal.
(Please contact SMC.)
■ Type of manual override is added
■ Vacuum Release Valve with Restrictor Series SMC SJ3A6
- Power consumption 0.15 W (with power saving circuit)
- Width: 10 mm (same size as Series SJ3000)
- Equipped with restrictor to enable flow rate adjustment of release air.
- Replaceable filters are built-in on the vacuum and release sides.
- Equipped with a pressure detection port enabling connection of a pressure switch, etc.
- Can be combined with 4 port solenoid valve, Series SJ2000/3000 (Made to Order).
(Consult SMC for details.) - Enables 2-system pressure switching where the 1(P) port and 3/5(E) are set to different positive pressures.
(In this case, flow can be adjusted on the P-port side only.)
■ Variations
